Join Date: Sep 2018
Location: St Ives Cornwall
My Motorhome: My Campervan is a Granduca 56 Built on a Fiat Ducato 10 SWB Frame
Thanked 0 Times in 0 Posts
Oyster Vision 2
Hi Everyone. I have been trying to solve a problem of why this second hand unit I have is not working when previous owner had no issues at all.
After stripping it down to find out why it would not lift and then rotate etc, I have found out now what the problem has been right from the start.
When it was removed from previous owner van, the hole in the roof was not big enough to pass through the large 14 pin plug, so the pin wires were removed from the plug so just the wires could pass through the hole with no problem and all the wires were then bundled all together and taped up.
This mean't it was never going to work until it was all reassembled back together again.
But my problem is now a technical one, all of the wires are in different colors and it is obvious the must go back into the plug in the correct sequence, or it may blow the controller Black box.
Please anyone out there I need to know what colored wires go into what pin position.
I am trying to find out via the manufactures, but I just keep getting passed from person to person. All I want is to know is what wire goes into where in the plug.
Thank you for anyone who can help